This RFID reader kit contains two tags (keychain and a keycard), SPI-based reader, and header pins.
Using this kit, you can RFID enable nearly any embedded device, including Arduino and Raspberry Pi.
It works with many popular 13.56MHz tags.
Specifications
- SPI serial interface
- Works with MIFARE
- Card Types: mifare1 S50, mifare1 S70, mifare UltraLight, mifare Pro, mifare Desfire (Desfire not supported by mentioned Arduino library)
- Frequency: 13.56MHz
- Voltage: 3.3V
- Operating current: 13-26mA
- Idle Current: 10-13mA
- Sleep Current: 80uA
- Peak Current: <30mA
Resources